User's Manual
Table Of Contents
- 1. Introduction
- 2. General Specification
- 3. Pin Definition
- 4. Physical Interfaces
- 5. Electrical Characteristic
- 6. Reference Design
- 7. Mechanical Characteristic
- 8. Recommended PCB Layout and Mounting Pattern
- 9. Recommended Reflow Profile
- 10. Ordering Information
FLC-BTM403 Series User Manual
Flaircomm Technologies Confidential
-15-
Figure 8: 16-Bit Slot Length and Sample Formats
4.3.7 Additional Features
The module has a mute facility that forces PCM_OUT to be 0. In master mode, PCM_SYNC may
also be forced to 0 while keeping PCM_CLK running which some CODECS use to control power
down.
4.3.8 PCM Timing Information
Symbol Parameter Min Typical Max Unit
128
256
fmclk
PCL_CLK
Frequency
4MHz DDS generation.
Selection of frequency
is programmable.
-
512
- kHz