User's Manual

BlueTone™ BTHF106 User Manual
End Call: Short press K1.
Redial: Long press K3.
2.5.2 Adjusting Headset Volume
In the talking mode，you can short press K2/K3 to increase/decrease your headset volume. You can repeat the
above operation to headset volume to a desirable level.
2.5.3 Mute
You can mute or un-mute an ongoing call by long pressing K1 and K3 together.When you mute an ongoing call,
you can hear 1 low tone every 20 seconds, and Blue LED gives 4 quick blinks per 3 seconds.
2.5.4 Transferring Calls to/from Your Handset
Transferring calls to your handset: Long press K1 and K2 together, Blue LED blinks once per 3 seconds.
Transferring calls from your handset: Long press K1 and K2 together, and Blue LED gives 4 quick blinks per 3
seconds.
2.5.5 Voice Dialing
If your mobile phone supports voice dialing, you can make a call via voice dialing from your headset:
Voice Dialing：Short press K1，you will hear key tone，and Blue LED gives 4 quick blinks per 3 seconds, Red
LED is off, then follow your handset user guide to complete voice dialing.
Cancel Voice Dialing：Short press K1, you will hear key tone，and Blue LED gives 3 quick blinks per 3 seconds.
2.5.6 Advanced Call Functions
If your mobile phone has call waiting/conference functions, this Bluetooth Headset can support the function by
following operations:
1. When you talk, at the same time a new call comes in:
1) Very long press K2, to answer new call and hold active call.
2) Very long press K3, to end active call and answer new call.
2. There are two calls in progress, one is active the other is hold:
1) Very long press K2, to toggle hold call and active call.
2) Very long press K3, to release active call and active hold call.
3) Long press K2, to make conference.
. 10