User's Manual

BTHF361
9
You can also use the USB charging cable to charge the device on your PC, which will
take longer to charge as the power output of the USB port is lower than it is with the car
charger.
Note:
1. It is recommended to charge your device when it is not in use.
2. Please note that “inserting” charger will cause a device reset and power off. The
existing connection between the device and the mobile phone will be
disconnected.
2.1.2 Battery Information
1. Once fully charged, BTHF361 headset supports continuous talk time up to 3.5
hours and standby time about 150 hours and the master handsfree car kit can
work up to 5 hours and standby for more than 300 hours.
2. When the battery is low, the Red LED will give 2 blinks per 3 seconds, and then
you need to charge the battery as described above.
Note that, over-charging will reduce battery life. If a fully charged battery is left unused, it
will lose power over time. Extreme temperature (either too hot or too cold) will also affect
its ability to charge, capacity, and lifetime.
2.2 Mounting your Handsfree
This Handsfree device can be easily mounted inside the car by using the companion
Sun-Visor Clip to fix the product on the sun-visor over the driver’s seat.
Note that, the microphone of the Handsfree must aim at the sound bearing.
Figure 3 Fixing the Sun-visor Clip
Note that, the sun visor clip is an integrated design with the product and users shall not
try breaking it apart from the product, or damages will be caused.
Sun-visor Cli
p