User's Manual

BTHF361
13
2. Switch on the handsfree. The handsfree automatically starts to connect the last
two connected handsets.
When two handsets are connected with the handsfree, the first connected one works as
the primary device and the other the secondary.
Any operation initiated from the handsfree side, such as redialing and voice dialing, will
only be applied to the primary device. If you want to initiate the operation for the
secondary device, you must disconnect with both two handsets, and then connect with
the secondary device only.
Operations initiated from either handset shall be applied to the handsfree as usual.
2.6.2 Call Operations
When two handsets are both connected to the Handsfree:
1. If only one handset receives a call, the call will be transferred to the handsfree and
all call operations will be the same as in the case of single connection.
2. If both of the connected handsets receive incoming calls at the same time, only
the first call will be transferred to and controlled by the handsfree (call waiting and
conference call are also controlled by the handset which receives the first
incoming call). After the first call is terminated, the call on the other device will
transfer to the handsfree automatically.