User's Manual

BTHF361
11
Note
1. If pairing is successful, handsfree’s Red LED is off. The Blue LED gives 3 quick
blinks per 2 seconds. If your handset shows that pairing is failed and the
handsfree is still in the paring mode, you need to go back to above steps 3-4 to
repeat the pairing process.
2. Your handsfree will remain in the pairing mode for about 2 minutes. If pairing
cannot be finished within 2 minutes, the handsfree will enter into the standby
mode (without Bluetooth connection in this case). You need to turn the handsfree
off and then repeat the above steps 2-4 to restart the pairing process.
2.4.2 Connecting your Handsfree with Bluetooth Equipment
This handsfree can be paired with up to 8 Bluetooth equipments (including mobile
handsets). The corresponding 8 sets of pairing information are recorded by the
handsfree. Each paired equipment can be wirelessly communicated with the handsfree
after setting up a Bluetooth connection.
Connecting your Handsfree with Bluetooth Handset
Initiating a request from either the handsfree or the handset can set up Bluetooth
connection. Detailed operations are as follows:
1. Initiating connection request from the Handsfree: Place the handsfree close to the
Bluetooth handset and then press main button.
2. Initiating connection request from the Bluetooth handset: Place the handsfree
close to the Bluetooth handset and then follow the handset user guide to find the
handsfree and send connection request.
After connecting, you will hear a high connecting tone. The Blue LED gives 3 quick
blinks per 2 seconds
2.5 Call Functions
2.5.1 Basic Call Operations
Before dialing, both your handsfree and handset must be power on. And you also need
to ensure your handsfree and handset have been linked with Bluetooth connection.
Answer Call: Press main button.