User Manual

BTHF304 User Manual
. 19
4. Quick User Guide
4.1 LED Indicator Patterns
 Pattern 1: Blue LED gives 1 blink per 3 seconds; Red LED is off. —— Standby (disconnected)
 Pattern 2: Blue LED gives 3 quick blinks per 2 seconds; Red LED is off. —— Connected
 Pattern 3: Blue and Red LEDs alternate continuously. —— Paring mode
 Pattern 4: Blue and Red LEDs alternate every 3 seconds. —— Battery low
 Pattern 5: Red LED always on; Blue LED is off. —— Select language
 Pattern 6: All LEDs are off.
——
Power off
4.2 Quick User Guide
You can follow the instructions listed in Table 1-7 below to operate your handsfree devices. (Please refer to section
1.5 for details of key and key press duration definitions.)
Table 1: Power on/off
CURRENT STATUS HANDSFREE INDICATOR FUNCTION
HANDSET HF
OPERATION
AUDIO TONE LED
INDICATOR
Turn On Power Off Press and hold button
for at least 3 seconds
“Handsfree device ready” Pattern 1
Turn Off Standby Press and hold button
for at least 3 seconds
“Handsfree device power
off”
Pattern 6
Table 2: Pairing/Connections
CURRENT STATUS HANDSFREE INDICATOR FUNCTION
HANDSET HF
OPERATION
AUDIO TONE LED
INDICATOR
Enter
pairing
mode
Power Off Press and hold
button for at
least 6 seconds
“Please select handsfree
device from mobile
phone and enter pin
code 0000”
Pattern 3
Erase all
paired
profiles
Paring Mode
Press and hold
button for at
least 3 seconds
Key Tone Pattern 1
Quit pairing
mode
Paring Mode
Press
button
Key Tone Pattern 1
Pair
handsfree
with handset
Power on Paring mode Follows your handset user
guide to complete pairing
procedure.
Passkey is “0000”
“Pairing successful” Pattern 1
Connect
with handset
(Success)
Standby
(disconnec-
ted)
Standby
(disconnect-
ed)
Press call button or set up
connection from the handset
“Connecting to
phone”—>
“Phone connected”
Pattern 2