User Manual

BTHF304 User Manual
. 12
2.6.1 Establish AV connection
For handset supporting Bluetooth A2DP profiles, you can establish AV connection between the handset and the
device to enjoy music at the device side while the music is played by the handset. Depending on the handset
capability, the AV connection could be established automatically when you start playing music.
If your handset does support Bluetooth AV profiles but you fail to get an AV connection when you start playing
music, you must follow your handset’s user guide to establish an AV connection before playing music.
2.6.2 AV Operations
The following operations can be used for remotely controlling your Bluetooth AV capable handset (must support
AVRCP profile) or media player to play music:
Play：Press call button
.
Pause：Press call button
.
Stop： Press and hold call button
for at least 3 seconds.
Forward：Press
button.
Backward：Press
button.
In addition, you can adjust sound volume up or down by rolling the volume wheel.up or down.
2.7 Pairing/Connecting with Other Bluetooth Equipment
In addition to Bluetooth phone, your handsfree can also pair with other Bluetooth equipment for realizing short
distance wireless communications. Similar pairing procedures described in Section 2.4 can be used. You can also
follow the user guide of the Bluetooth equipment to complete the paring on the equipment side.
This handsfree can paired with up to 8 Bluetooth equipments (including mobile handsets). The corresponding 8 sets
of pairing information are recorded by the handsfree. Each paired equipment can wirelessly communicate with the
handsfree after setting up a Bluetooth connection. Please check Section 2.4.3 on procedures to set up a Bluetooth
connection.
2.7.1 Connecting your Handsfree with USB Dongle
Before pairing and connecting, you must ensure the USB Dongle has already been connected with your PC, and
Bluetooth driver software IVT’s BlueSoleil has been installed in PC.
Detailed operation procedures are as follows:
1. Press and hold
button for at least 6 seconds until the Blue and Red LEDs alternate continuously. You will
hear a voice of “Please select handsfree device from mobile phone and enter pin code 0000” which indicates
that the Handsfree has successfully entered the paring mode.
2. Start “IVT BlueSoleil”, click “My Bluetooth—>Bluetooth Device Discovery” on the main menu, and search
the Bluetooth device in range.
3. After finding your handsfree device, right click “BTHF 304”, and choose “Pair Device”.
4. Enter passkey ’0000’ and confirm to pair the Handsfree with your computer.