User's Manual

BlueTone
™
BTHF260 user manual
6. Quick User Guide
You can follow the instructions listed in Table 1-7 below to operate your handsfree devices. (Please refer section
1.4 and 1.5 for details of key and key press duration definitions.)
Note: your handsfree devices can only talk to paired Bluetooth handsets. For handsets supporting HFP only, you
also need to establish Bluetooth connection between your handsfree and your phone before making and answering
calls.
Table 1: Power on/off
CURRENT STATUS HANDSFREE INDICATOR
FUNCTION
HANDSET HF
OPERATION
AUDIO TONE OLED INDICATOR
Turn On Power Off Press and hold the
button for 3 seconds
2 power-up tones
Display ‘BTHF260’
in the screen
Turn Off Standby Press and hold the
button for 3 seconds
2 power-down
tones
The screen is off
Table 2: Pairing/Connections
CURRENT STATUS HANDSFREE INDICATOR
FUNCTION
HANDSET HF
OPERATION
AUDIO TONE OLED INDICATOR
Enter
pairing
mode
Standby Press the button to enter
the menu. Choose “Enter
Pairing Mode” and press the
button
2 power-up
tones
Display the icon in
the screen
Quit pairing
mode
Pairing mode
Press the ╋ or ━ button
the icon will
disappear
Delete all
paired info
Standby
Press the button to enter
the menu, choose ‘Delete
Paired Info’ then press the
button.
Pair
handsfree
with handset
Power on Pairing mode Follows your handset user
guide to complete pairing
procedure.
Passkey is “0000”
2 alt
Display the icon in
the screen
Connect
(handsfree
with
handset)
Standby
(disconnecte
d)
Standby
(disconnect-
ed)
Press the
button or set up
connection from the handset
2 undertone During the
connecting, the icon
will display in
the screen. After
connecting, the icon
will display in
the screen to
replace the icon
.
Disconnect Standby
(connect)
Standby
(connect)
Press and hold the button
for 3 seconds refer to
handset’s manual to initiate
the connection from the
handset side.
The icon
will
disappear.
. 21