User's Manual

BlueTone™ BTHF107 User Manual

. 9

Figure 6 Detach Clip from metal base

With great portability and flexibility, this device can also be used outside of such car environment such as in office

and/or at home.

2.3 Turn On/Off Handsfree

Turn on the Handsfree: Press and hold button for at least 3 seconds, you will hear 2 power-up tones, the Blue

LED gives 3 quick blinks following by 1 blink per 3 seconds; the Red LED is off. This indicates the handsfree is

power on.

Turn off the Handsfree: Press and hold button

for at least 3 seconds , you will hear 2 power-down tones, the

Red LED will blink 3 times then all LEDs are off. This indicates the handsfree is power off.

2.4 Pairing/Connecting your Handsfree with Bluetooth Equipment

2.4.1 Pairing your Handsfree with Bluetooth handset

Before making and answering calls, you must pair your handsfree and phone. Paring sets up a unique relationship

between your handsfree and your handset. The handset will memorize the handsfree’s unique ID (or passkey). This

ensures that a unique and encrypted wireless link between your handsfree and handset will be used during calls.

Detailed operation procedures are as follows:

1. Place your handsfree close to your Bluetooth handset, and ensure your handsfree is power off, your handset is

power on

2. Press and hold button

for at least 6 seconds until the Blue and Red LEDs alternate continuously. You will

hear 2 power-up tones and a pairing tone to indicate that the handsfree has successfully entered the paring

mode

3. Following your phone user guide to active Bluetooth device search on the phone side, on your phone screen

you will see a list of Bluetooth equipment found by the phone at the end of the searching process.

4. Select this Bluetooth Handsfree from the list ‘BTHF107’, and initiate pairing following handset’s on-screen

prompts.

5. Continue to follow on-screen prompts to enter passkey “0000”and confirm to pair the handsfree with your

handset. Once the pairing procedure is completed, you will hear a connecting tone, and then Blue LED gives 3

quick blinks per 2 seconds. It indicates that the handsfree device and the handset are paired and connected.

Note

：

Pull out a little and pus

down from here