With colo or-changing LED lights BW WD19AAS12 Ver.01 Rev.
Power LED Program selector Volume Down/ Previous i Trackk POWER: Press and hold the. Play/P Pause Volume Up/ Next Trackk Power button for 2 seconds to t turn device on or off. VOLUME +: Short press (< 0.5s) the Volume Up + button to turn n up volume. Press and hold the + button (2s) to go to the next track. VOLUME - : Short press (< 0.5s) the Volume Down – buttons to turn down volume. Press and hold (2s) the – button to go to previous track.
SPEAKER PAIRING: To pair the speaker: 1. Make sure the smartphone, tablet, or computer you’re y using with the speaker has Bluetooth. 2. Turn on the speaker (press and hold the power bu utton for 2 seconds) and look for the small blinking light. 3. Find the BW COLOR SPK S speaker p in your y device’s Bluetooth list,, and select. The device and Bluetooth will find each other every y time, so long as the speaker is set to Bluetooth and your device’s Bluetooth is on.
AUX-IN Indicator light USB Charging port AUX-IN MODE: 1. Plug one end of the cord intto the speaker and the other into the headphone jack on your device. Press play. (NOTE: The speaker must be on n in order to play.) play ) USB CABLE: 25 cm micro-USB cable. CALL HANDLING: INCOMING CALL: Answering and ending a call – When speaker is paired to t your phone, press the play/ pause press the play/pause button to answer the call. To o end a call, button.
FCC WARNING: This equipment has been tested and found to comply with the e limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio cammunications.
