Instruction Manual

6 7
BUTTONS
1. Power Button
• Short press play/pause ball
• Long press lights and ball off
2. Light Button
• Short press cycles through saved colors
• Long press lights on/off
3. Power Por t
SET UP
1. Remove all protective materials over the felt surface inside your drift
bowl. Pour one bag of sand into the center of the table and use the
included sand rake to level the sand (does not need to be perfect).
2. Place the metal ball into the center of the table; it will find the
magnet. If it does not find the magnet right away, the magnet will
find the ball during the first design.
3. Place the glass foam side down on the top and center it.
4. Untie the power cord, connect the cord to the adapter, and insert
the barrel jack into the back of the drift Sandscape. Then plug-in the
3-prong adapter plug to 120-volt househould electrical outlet. The
lights will illuminate.
5. Download the drift Sandscape App from the app store.
6. Follow the instructions within the app for set up and get ready
to drift.
MAINTENANCE
1. Even out the sand. Over time, sand may build up on the outside of
the sand surface. You can just use the included sand rake or any flat
card to redistribute sand as needed.
2. You can clean the glass surface with any glass cleaner.
3. The product is built to give you 8 hours of continuous use. If it has
stopped and you want to drift longer, restart in the app or short
press the power button on the back of the unit.
Power Button Light Button
Power Port