User's Manual

Software User Manual

Figure 3.7.27 Language selection

7.3.7 Wi-Fi Camera (Optional)

Two Wi-Fi cameras can be connected via hotspot. The operation is as

follows:

1. For the first use, please turn on the Wi-Fi camera in the Settings.

2. Turn on the hotspot mode before binding, and scan the code via

camera to identify and bind the camera. Up to two cameras can be bound

via scanning the code. The scanned camera is displayed on the right side.

Click OK to enter the camera view page.

3. The current video stream can be viewed on the camera list page. If it

is required to bind other cameras, click Delete and repeat the binding

steps to bind.