User's Manual

Software User Manual

the user's actual operation needs, six operations can be carried out:

switching operation record status, switching driving mode, shifting the

guidance line, switching operation mode, marking the field and switching

guidance lines and boundaries. The specific operation process is as follows:

(1) Switch operation record status

Click Record button in the lower left corner of the main interface to

switch the status of the operation record.

Non-recording operation status: The operation data and

operation traces during the non-recording time are not recorded in this

operation.

Record operation status: operation data and operation traces

during the recording time are recorded in this operation.

(2) Switch driving mode

Click Start/Stop at the bottom right corner of the main interface to

switch the driving mode.

Manual driving status: The user manually controls the steering

wheel to assist straight line operations. When driving manually, user can

perform operations such as shifting the guidance line, switching operation

modes, and marking the boundary.

Autosteering status: Navigation automatically controls the

steering wheel to assist straight line operations. The operation of marking

the field can be carried out during automatic driving, and other operation

setting operations should be switched to manual mode.

(3) Guidance Line Translation

In the manual mode after starting the task, the user adjusts the

guidance line in the current multi-line mode to the left and right according

to the needs of the actual operation, and drives according to the adjusted

guidance line.