User's Manual

Software User Manual

mode and single line mode of guidance line.

6. Offset distance: The offset distance between the current path and

the guidance line is displayed in real time, and the unit can be changed in

the settings.

7. Guicance line: Guidance line for auto-steering

8. Boundary: The red one is the recorded boundary, and the black is

the scaled boundary. A prompt will pop up when the distance to the black

border is 30m, and the black border can be set as the position where to

turn around (Uturn position) or the real edge of the field.

9. End task: Click to end the task, and you can view the details of this

task in the task data.

If the guidance line has not been imported before starting

the task, an icon for creating a new baseline will appear in the

operation interface.

Create a new guidance line/boundary: If the guidance line and

boundary are not chosen during task configuration, when entering the

operation interface, you can directly create a new guidance line and

boundary in the operation interface, and the task data of this creation

would also be recorded.

5.2 Operation Setting

After completing the installation and commissioning and task

configuration procedures in sequence according to the above operations,

it will start automatic driving operation. During the operation, according to