User's Manual

Software User Manual

point on on the edge of the opposite side.

2. In multi-line mode, make sure to travel in the same line lengths as the

curve guidance line, or the route beyond the curve guidance line will

gradually tend to a straight line.

3. In curve mode, after confirming Point A, you cannot directly click Linear

to switch to Straight line mode. Please cancel the point A before switching

the mode.

Pivot mode：

Pivot mode is only supported under Advanced Mode, the steps are as

follows:

Step 1: Choose Pivot Mode when entering the process of creating new

guidance lines.

Figure 3.4.10 Create a guidance line