User's Manual

Software User Manual

Figure 3.3.4 "SXX" displayed in the upper right corner when the SBAS mode is used

3.1.2 Getting the Heading Angle

If the RTK connection is normal, drive ahead and accelerate the vehicle

for more than 5s（Only one operation is required for each startup）.

3.1.3 Adding New Guidance Line

After confirming the connection to the RTK, you can start setting

points. You can follow the prompts to complete setting points A and B to

save a new guidance line, and import the new guidance line to the current

operation. For more specific instructions on creating guidance lines, please

refer to Chapter 4 to create a baseline.

3.1.4 Import Guidance Line

You can directly import the required guidance line from the list of

guidance lines to the current operation as follows:

Step 1: If you have already saved the guidance line before, please find

out the line you want to import in the list of guidance lines. And then click

Import button in the required guidance line tab to import the line to the

current operation.