User's Manual

Software User Manual

4. When the kit is under the testing, calibration, adjustment, or automatic

steering, please ensure that there are no people or obstacles near the

running track to prevent personal injuries or property damages.

Operation Rules

1. During driving or operating, it is strictly prohibited to get on or off the

vehicle during driving.

2. The vehicle must be kept under monitoring by the driver to ensure timely

intervention.

3. When a vehicle equipped with this kit is driving on public roads or public

areas, please ensure that the kit is powered off.

Checking

1. Make sure to have enough fuel in the driving vehicle.

2. Ensure that the parameters in the kit are calibrated before the automatic

driving operation.

3. Make sure the antenna and angle sensor are installed properly. If there is

any movement, please calibrate it again before using.

4. Do not use worn or damaged cables. Please purchase and replace new

cables in time.

Others

1. Do not disassemble the product yourself, or it will affect the warranty

service.

2. The equipment damages caused by force majeure (lightning strike, high

voltage, collision), are not included in the free maintenance service.

3. Please strictly follow the manual to connect the device. For connecting

cables such as data cables, you need to pinch the root of the plug and

insert it gently. Do not pull it hard or even rotate it, which may cause

needle breakage.

4. Please follow the supply requirement to power the device. Note that the

power rating for controller and electric steering wheel is 10-30V.