User's Manual

Software User Manual
©FJ Dynamics Technology Co., Ltd. All rights reserved.
96
Chapter Ⅴ FAQs
No.
Fault
Troubleshooting
1
S turn in
autosteering
operations
Check whether the rolling angle and pitching
angle change in real time.
Calibrate the angle sensor (optional).
Check whether the GNSS receiver is installed
and connected properly.
2
Steering wheel
malfunction during
autosteering
operations
Check the brake.
Test the motor.
Power off and restart the vehicle.
Check whether the GNSS receiver is installed
and connected properly.
3
No 4G signal
Check whether the SIM card is inserted.
4
No RTK signal
When the mobile base station is connected,
check whether the base station is powered on
or operating normally.
When the Network RTK is connected, verify
whether 4G signals are normal.
When the Network RTK is connected, verify
whether the Ntrip account is valid.
5
Inconsistent
working width in
multi-line mode
Verify whether the vehicle parameters are
entered correctly.
Verify whether the vehicle calibration in
Settings is completed.
Calibrate the implement again.
6
“Service not
enabled, power off
Power off and restart the vehicle.