Operation Instruction

Operation Instruction for visual obstacle avoidance module

Device Installation

1. Below is the network connection method:

2.Install and fix the FJDZ42P-VM on the vehicle.

3.Connect the power cable to the power supply port and connect the power supply port.

4.Connect the network cable to the module and the host computer.

5.When it is powered on, the module will judge whether there is an obstacle in a certain distance

ahead and send fixed format information to the upper computer.

6.The real-time image of the camera can be viewed by wirelessly connecting the 5G WiFi of the

module. The network address is as follows(Network addresses may be subject to setting changes):

Setting Camera 192.168.1.254/debug_websocket.html

Inspection and Maintenance

 Check the power supply and the cable connection.

 Check whether the camera is blocked.

 If the device is faulty, contact the manufacturer or service agent.