Installation Instruction
Hardware Installation Instruction for FJDynamics Autosteering Kit
© FJ Dynamics Technology Co., Ltd. All Rights Reserved
1
1.
Introduction
The FJDynamics autosteering kit for agricultural machinery, launched by FJDynamics, supports assisted
straight-line driving and front-mounted fully unmanned transformation. The system can not only control
the steering to realize the assisted driving of the vehicle, but also realize the fully unmanned
transformation of agricultural machinery through the control of the vehicle's accelerator, brake, clutch,
transmission, and operation unit. The system is composed of data communication equipment, in-vehicle
display and control terminal, BeiDou high-precision positioning equipment, steering motor, angle sensor,
attitude sensor, communication antenna, wiring harness, etc. Among them, the in-vehicle display and
control terminal is equipped with autosteering software independently developed by FJDynamics.
2. Preparations
2.1SafetyRequirement
To avoid personal injury and equipment damage, please read the safety recommendations herein
carefully before installation. The following safety recommendation does not cover all possible hazardous
conditions.
Installationsafety
Do not install the product or perform debugging in the environment with high temperature, heavy
dust, harmful gas, inflammable substances, explosive substances, electromagnetic interference
(large radar station, transmitter station, substation), unstable voltage, high vibration or loud noise;
otherwise, the equipment may be unable to operate normally.
Do not install the equipment in places vulnerable to water accumulation, water seepage, water
dripping, condensation, etc., so as to prevent the equipment from being damaged by water
accumulated at the interface.
Removalsafety
After the equipment has been installed, do not remove it frequently for fear of unexpected damage.
Before removal, please turn off all the power supplies and remove the battery cable to prevent
damage to the equipment due to live operation.
Electrical safety
Carry out electrical operations in accordance with local regulations and specifications by qualified
electricians.
Please carefully check the working area for potential hazards, such as wet floor.
Before installation, identify the location of the emergency power switch. In case of an accident,