Installation Instruction

Hardware Insta

llation Instruction for FJDynamics Autosteering Kit

LTE TDD: B38/B41

WCDMA: BAND 2/BAND 4/BAND 5

E-GSM850, DCS1900

2.Please make sure that the data service of the SIM card you purchased has been activated.

3.After the SIM card is installed, please confirm whether the APN and network type need to be set

according to the Instructions. If necessary, please turn on the in-vehicle display and control terminal and

complete the network configuration in the built-in Android system.

4.7.2 Installation of SIM card

1. Please use a Phillips screwdriver to unscrew the T3 cover of the top control box of the in-vehicle

display and control terminal to expose the following SIM card insertion interface.

2. With the SIM card chip facing up, use thimble and tweezers to slowly insert the SIM card into the

appropriate position of the SIM card slot in the top T3 interface.

Now, the hardware installation of the FJDynamics autosteering kit has been completed.

5. System debugging

5.1 Debugging site requirement

1. The agricultural machinery shall be in good conditions and all parts

shall work normally.

2. The agricultural machinery shall not be attached with accessories.

3. The agricultural machinery shall be balanced by counterweights.