Installation Instruction

Hardware Installation Instruction for FJDynamics Autosteering Kit
© FJ Dynamics Technology Co., Ltd. All Rights Reserved
20
2. Insert the ca
sing weldment from both ends, and install 4 hexagon bolts M5x16 and hexagon nuts M5
(do not tighten them at this moment), namely, the casing weldment can be moved leftwards and
rightwards on the mushroom head bracket.
3. Install the GNSS antenna and fix it on both ends of the bracket with 2 outer hexagon bolts 5/8-11 and
4 plain washers.
GNSS bracket
Bolt
Washer
Plain
washe
r
Nut
Plain washer
GNSS bracket
Bolt
Nut
Welded casing