Installation Instruction

Hardware Installation Instruction for FJDynamics Autosteering Kit
© FJ Dynamics Technology Co., Ltd. All Rights Reserved
16
2. Inst
all the angle sensor bracket and fix it with 2 Hexagon socket head cap screws M3×6 and
washers.
3. Inst
all the angle sensor bracket selected in step 1 and fix it with 2 cross recessed countersunk head
screws M5x8.
(Note: The plane a should be parallel to plane b, and line c should be parallel to line d).
Mounting bolt *
3
Angle sensor connection
bracket
Screw
Angle sensor assembly