Installation Instruction

Hardware Installation Instruction for FJDynamics Autosteering Kit

5. Install the motor bracket (Note: The structure of instrument panel below the steering wheel depends

on the model, and please select the motor bracket accordingly. For the sample vehicle, the motor

bracket 2 is used), and fix it with 2 hexagon socket screws M6×16 and washer 6 (do not tighten the bolts

at this moment).

6. Inst

all the steering motor & steering wheel assembly onto the sample vehicle with steering wheel

removed, adjust the motor connector to the position convenient for wiring harness connection, install the

steering hoop block, adjust the position of the motor mounting bracket, and finally tighten the

corresponding standard parts, so as to ensure that the bracket is firm and reliable and the motor outer

ring will not rotate with it.

Washer

Screw

Motor mounting

bracket

Installation of steering motor & steering wheel

assembly

Steering hoop

block

Nut

Plain

washer

Washer

Bolt

Motor steering wheel

assembly