Installation Instruction

Hardware Installation Instruction for FJDynamics Autosteering Kit

4.1.2 Installation steps of electrical steering wheel

1. Remove the steering wheel of the sample vehicle: Remove the protective cap of the steering wheel,

and then undo the lock nut (keep the nut for future installation), and pull out the steering wheel.

2.Select the splined slee

ve according to the type of spline of the steering column: Install the splined

sleeve on the steering column and rotate it leftwards and rightwards until no shaking and clearance is

involved. For the sample vehicle, the 1# splined sleeve is applicable.

Protective

cap

Lock nut

Steering

wheel