Specifications
13
7.2 Models 77300, 77305, 77307 und 77310:
The lens cannot be changed.
8 Changing the Bulb:
Mind the Notes on Safety!
Adjust the lamp pointing upwards.
Models 77300 and 77307:
1. Unscrew the screws of the cover with a tting screwdriver
from the lamp.
2. Change the ourescent ring.
3. Ret the cover and tighten all screws.
4. Ret your Fixpoint
®
-Lenslight into basic position.
Model 77305 and 77457:
1. Remove the cover by pulling it carefully at the inside.
The cover is clicked. The 77457 is clicked sidewise - Turn.
2. Change the ourescent ring. It must be carefully clicked
out of the metal holders. After that the cable must be removed.
3. Mind of pushing the base and the cables in the destinated
cavity after changing the ourescent ring.
4. Remove the cover.
5. Ret your Fixpoint®-Lenslight into basic position.
Model 77310:
1. Remove the covers carefully rst by pulling them at the
opposite of the base. Pull them upwards and sidewards for
removing.
2. Change the bulb.
3. Ret the cover in reverse order, described in point 1.
(You need 2 replacement bulbs.)
4. Ret your Fixpoint
®
-Lenslight into basic position.
77301 WZ Lenslight 100 replacement bulb for 77300 Ø 135mm, 12VA
base: T4
77308 WZ Lenslight 125 replacement bulb for 77307 Ø 180mm, 22VA
base: T5
77306 WZ Lenslight 125 replacement bulb for 77305 Ø 210mm, 22VA
base: T9
77311 WZ Lenslight 190 replacement bulb for 77310 L: 150mm, 9 VA
base: PL
9 Care, Maintenance, Storage and Transport:
• Please clean the lamp only with a dry linen. Be careful with the cleaning to avoid
scratches. For intensive pollution you can damp the linen with some water. Do not use
cleaning supplies and chemicals, because they can corrode the plastic material.
• Attendance includes frequently checking of the stability. Models with hinged bracket are