User manual

4.9 Replacing the magnifying lense

4.9.1 Model 45272 and 45273

1. Set the LED Magnifying lamp

       horizontallywithcoveratupwards.

2. Switch off the LED Magnifying lamp.

      3. Turnthemagnifyinglensxationanti-

clockwise by hand until loosened and

Fi g. 24: Replacing the lense light

take it off.

Forreassembling,followsteps1-3in

reversedorder.

4.9.2 Model 45268 and 45271

The magnifying lens is not replaceable.

5 Care, Maintenance, Storage and Transport

Risk of injury by moving product parts

>> Do not hold limbs between shear parts during use.

Material Damage

Check the stability of the system periodically after

installation.

Avoidextremeconditions,suchasextremeheat,

coldness,humidityordirectexposuretothesun,as

well as vibrations and mechanical pressure.

Do not use any detergents or chemicals.

Fig. 2 5: Maintenance, Care, Storage and Transport

5.1 Care

• Use a dry and soft cloth to clean your product. Be careful to avoid scratches.

Use a slightly moist cloth for heavy stains. Look out for live cables! Do not

use any cleaning supplies. This can cause burns to the materials. Avoid

liquid entry to the device.

• Periodicallycheck,ifallattachmentsandscrewsaresecured,andtighten

them again when they are loosened. This may be caused e.g. by frequent

movements. Do not overtighten screws.

5.2 Maintenance

• The product must be maintained only by professional workshops.

• Protect the angles from dirt and grease them regularly with light machine oil.