User manual

17
4.3 Connecting the single parts
Risk of injury by tripping and falling
>> Place,transportandinstallproduct,partsandacceo-
ries in a safe way.
Ta b . 11 : Connecting the single parts
1. Plug the LED Magnifying lamp onto
the table clamp.
      WhenadjustingtheLEDMagnifyinglamp,
      alwaysmakesurethattheconnectiontothe
      tableclampisonlyplugged.
Fig . 16: Connecting the single parts - putting on
2. Adjust the locking screw at the
upper side of the LED magnifying
lamp as needed.
Fi g . 17: Connecting the single parts - adjusting
4.4 Connecting
Risk of life by electric shock
>>
>>
Avoid contact with mains voltages!
Only use in dry ambience!
Fig . 18: Connecting
Connect the LED Magnifying lamp to a
mains socket.
Fig. 19: Connecting
End of installing. To remove, proceed in reversed order.