User manual

44872
EN
User Manual
2in1 LED table and clamp magnifying lamp
- 3 -
Fixpoint
®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
REV2016-06-24
V1.2
1 Safety Instructions
1.1 General
• Read the user manual completely and carefully before use.
It is part of the product and contains important information for correct use.
• Keep this user manual.
It must be available for uncertainties and passing the product.
• Do not open the housing.
• Do NEVER let the product unattended in use.
• Comparethespecicationsofproduct,powersupplyandperipherals.
These must be identical.
• Not meant for children.
• Do not repair defective products by yourself, but contact the dealer or
producer.
• Do not modify or alter product nor accessories.
• Avoid stresses such as heat and cold, moisture and direct sunlight, vibra-
tion and mechanical pressure.
• Only use in dry ambience.
• Risk of injury by stumbling and falling
• Use the desk stand only on stabil, non-slipping and horizontal surfaces.
• Use the mounting clamp only on stabil plates with a thickness of 10-60 mm.
• Only use the power supply, included in delivery.
• Switch off the lamp before working on it and disconnect the mains plug.
1.2 Warning levels
Warnings against hazards that may result in injuries in case
of non-observance.
Warnings against hazards that may result in material
damage in case of non-observance.
2 Description and Function
2.1 2in1 LED table and clamp magnifying lamp
This product is an energy-saving 2in1 LED table and clamp magnifying lamp with
exchangeable4Inchlens,exiblegooseneck,deskstandandmountingclamp.
2.2 Operating elements and parts
1
2
3
4
5
6
7
8
1 ON/OFF switch
2 mounting ring
3 magnifying lens
4 gooseneck
5 power supply and DC connection
6 locking
7 desk stand
8 mounting clamp
Fig. 5 : Operating elements and parts
2.3 Scope of Delivery
2in1 LED table and clamp magnifying lamp, desk stand, mounting clamp, power
supply, user manual
3 Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4 Preparing
• Comparethespecicationsofproduct,powersupplyand
peripherals. These must be identical.
• Check surfaces and plates for being stabil.
5 Assembly/Disassembly
Breaking the locking lug
• Carefully assemble and disassemble.
5.1 with desk stand
7
6
Fig. 6 : with desk stand
• Turn the locking lug (6) or desk stand (7) until they engage each other.
5.2 with mounting clamp
8
6
Fi g . 7: with mounting clamp
• Turn the locking lug (6) or mounting clamp (8) until they engage each
other.
6 Connecting
Risk of injury by stumbling and falling
• Ensure safe cable laying.
• Connect the delivered power supply to a well accessible mains socket
and to the DC-connector (5).
7 Operating
1. Make sure before each use for secure attachment of the lamp.
2. Setthelampalwaysinaway,thatonehandxesthetablestandorthe
mounting clamp and the other hand the sets the lamp at the top.
3. Switch the lamp on or off by the ON/OFF switch (1).
8 Relampings
Thelampsarepermanentlyinstalledandcannotbeexchanged.
9 Removing the magnifying lens
Risk of injury and material damage by glass breakage
• Lupenlinse vorsichtig entnehmen.
2
3
Fig. 8 : Removing the magnifying lens
Themagnifyinglensisexchangeableandcanberemovedafterbraekageorfor
transporting.
1. Set the lamp horizontally.
2. Turn the mounting ring (2) with both hands anti-clockwise on the corruga-
tions for loosing.
3. Assemble or disassemble the magnifying lens (3).
4. Turn the mounting ring (2) with both hands clockwise on the corruga tions
for tightening.
10 Specications
Article number 44872
Environment conditions -5~+40°C,max.95%RH
Lamp
Connections DCsocket(2.1x5.5mm)
Dimensions
Lamp:555x123x50mm,
Deskstand:154x145x30mm,
Mountingclamp:116x80x72mm
Weight
Lamp: 307 g,
Desk stand: 784 g,
Mountingclamp:92g
Magnifying lens Ø100 mm
LEDs 30 SMD LEDs
Luminousux 570 lm
Power 6 W
Color temperature 6200 K