SDS

Material Safety Data Sheet
3 of 6
Product name
EMNA/EN
M
SDS number Revision Date
Revision Number
Fix-A-Floor -200 NSC
Emulsion (251800)
85403C
7
Issuin
g date
March 03/2022
Feb.20.2013
Environmental precautions
Do not flush into surface water or sanitary sewer system.
Methods for cleaning up
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable,
closed containers for disposal. Contaminated equipment (brushes, rags) must be cleaned immediately with water.
Dispose of in accordance with local regulations.
7.Handling and storage
Handling
Advice on safe handling
Product may contain hazardous volatile ingredients which could accumulate in the unvented headspace of drums or
containers. Open containers in ventilated area. Do not breathe vapor. During longer storage small amounts of
carbon monoxide may form. To the best of our knowledge, no OEL (occupational exposure limit) is exceeded during
the intended use. . Containers/tanks may only be entered after thoroughly executed ventilation while considering
national regulations and international standards for inspection of containers/tanks. In any case of doubt a
measurement of the CO concentration is necessary.
Protection - fire and explosion:
No special protective measures against fire required.
Storage
Tech
nical measures/Storage conditions
Keep tightly closed in a dry and cool place. No special technical protective measures required.
Material storage
Protect from frost. Keep at temperatures between 5 and 35 °C ( 40 and 95 F).
Incompatible products
Materials that react with water
8.Exposure controls / personal protection
OSHA Exposure Limits
No exposure limits established.
ACGIH Exposure Limits
No exposure limits established.
Mexico National Exposure Limits
No exposure limits established