SDS

Page 5 of 11
Safety Data Sheet
acc. to OSHA HCS (29 CFR 1910.1200)
Printing date 02/25/2015 Reviewed on 02/25/2015
Trade name: Aerosol Sealant
(Contd. of page 4)
40.1.0
LMPE (Mexico) Long-term value: 10 mg/m³
·
Additional information:
The lists that were valid during the creation were used as basis.
·
Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
·
Engineering controls:
No further relevant information available.
·
Breathing equipment:
Not required under normal conditions of use.
Use suitable respiratory protective device when high concentrations are present.
·
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
·
Eye protection:
Safety glasses
·
Body protection:
Not required under normal conditions of use.
Protection may be required for spills.
·
Limitation and supervision of exposure into the environment
No further relevant information available.
9 Physical and chemical properties
·
Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Aerosol
(Contd. on page 6)