User Manual

F ABBRICA ITALIANA VEICOLI ELETTRICI
8
7、 Error codes
The error codes are shown at the top-right of the display. Check the following Table.
In case of error, please contact the Technical Support.
Error code definition table
Error code
Description
2
Overcurrent protection / Motor’s Hall signal anomaly / controller’s
internal power device / motor’s phase missing
3
Motor’s Hall signal anomaly / safety shutdown of the motor
anomaly / bad contact of power supply terminal / damage control /
motor damage
4
Low voltage
5
Faulty brakes sensor
6
Battery anomaly
7
Throttle anomaly
9
Voltage anomaly
A/10
Display and controller communication fault (yellow cable)
F/15
Display and controller communication fault (green cable)
Display does not turn on or shuts down after 3 second from turning on: please check
that controller cables or supply power cables are well connected.