Installation Guide

Framed Floor Vent

[Lite]

Install Guide

Materials Needed

- Pre-cut piece of surface material for tray insert.

(Size will vary for vent sizes).

- Bonding material (will vary for ﬂooring materials).

*NOTE*

- If duct opening is larger than the Base of the vent, use

additional screws to add strength.

Apply even pressure so the ﬂoor

material is level to rim of Tray.

Let cure.

Insert vent in place.

Enjoy!

Apply adhesive bond in Tray.

Insert pre-cut ﬂooring material.

*Control Air Flow*

No airﬂow included with this model. See which Lite Dampers are

compatable with this product at www.ariavent.com

Additional Support

support@ﬁes.com / www.ﬁes.com

Made in Canada

BONDING AGENT

PRE-CUT INSERT

3 4

PAGE 1
Framed Floor Vent [Lite] Install Guide Materials Needed - Pre-cut piece of surface material for tray insert. (Size will vary for vent sizes). - Bonding material (will vary for ﬂooring materials). *NOTE* - If duct opening is larger than the Base of the vent, use additional screws to add strength. 2 PRE-CUT INSERT BO ND IN G AG E NT 1 Insert pre-cut ﬂooring material. Apply adhesive bond in Tray. 3 4 Insert vent in place. Apply even pressure so the ﬂoor material is level to rim of Tray.