User Manual

4
Find Great Educational Videos on Don’t Forget to Like & Follow us:
@fitterfirst
Manufacturer’s Warning
This equipment is designed to enhance the user’s balance skills in a controlled environment. The user
accepts total responsibility for injury to himself/herself and others. Only use this equipment after you
have a complete understanding of its function and intended purpose.
By stepping onto this equipment the user accepts complete responsibility and acknowledges agreement
to these terms:
1. User has read and completely understands operational directions.
2. User has inspected equipment to ensure correct cord tension setting.
3. User has had approval to engage in this activity from his/her doctor.
4. User agrees to safety first - children must have adult supervision. Use Fitterfirst products
only for the purposes for which they are intended.
5. User accepts total responsibility and assumes all risk involved in using this equipment,
and waives any rights to themselves, their heirs, their executors or any other party to hold
the manufacturer or its representatives responsible for any direct or indirect damages
whatsoever, caused by use of this equipment.
Maintenance
Basic maintenance of your Pro Fitter is important, regardless of whether you use it a little or a lot. Here are
tips, which are designed to help you keep your Pro Fitter in top condition.
Tracks
The Top Tracks of the Pro Fitter 3D Cross Trainer must be cleaned and lubricated regularly to prevent
cracking. Simply wipe the track clean, then apply WD-40 (or similar) on the entire track surface. The track
should be replaced at first reasonable sign of wear or if cracked.
Bottom Tracks should be cleaned with soap and water only. Refrain from using any lubricants on the
Bottom Tracks to prevent slipping. Replace if the grey, non-slip material on the bottom tracks wears away.
Cords & Tension Adjustment
Inspect at each cleaning. Due to travel around the rollers, fuzzy cords are normal. However, exposed
rubber strands indicate cord wear. As you use the Pro Fitter, try switching cords (outer two in the center
and center two on the outside) to prolong life. If you see any exposed rubber strands, replace the cord
immediately. See page 3 for proper cord setup.
Rollers
Check all rollers for a smooth rolling action and a firm mounting; there are two rollers on the base and one
three-piece roller on the skate. This is basic maintenance and should be a regular routine. If you hear any
unusual sounds while using the Pro Fitter, check them out immediately, or have someone else look at the
machine if you are unsure.
Placement
Keep your Pro Fitter in a clear area away from other machines, this is especially important as people
become more confident and aggressive when using the machine. In many ways using the Pro Fitter is like
participating in skiing or any other sport. Play safe by knowing and maintaining your equipment.
Safety
Enclosed is your laminated exercise chart. Please keep it visible at all times for new users to read before
stepping onto your Pro Fitter. Use your Pro Fitter with care and caution - think safety first. Enjoy your Pro
Fitter and all it has to offer for a well balanced, FUNctional exercise and rehabilitation program.
For replacement parts, see page 13. Only use with Fitterfirst replacement parts.