Owner's Manual

20
IV. Using Your Cubii Go+
Distance Metric Toggle
Switch from miles to kilometers, or kilometers to miles, by
switching the setting in the mobile app. When this action is taken,
the app communicates the change to the elliptical console so it
displays the appropriate distance metric.
Resistance Level
The Cubii app will automatically retrieve the resistance level from
the elliptical. However, please note that the app CANNOT update
the resistance on the elliptical itself. The resistance is managed by
the elliptical and the app reads that information.
User 1, User 2 and Guest Proles
YourCubiiellipticaloffersmultipleuserprolesontheconsole
in the event that you plan on sharing your device. This means
that you can easily keep track of your data separately by simply
switchingproles,soUser1,User2andGuestprolescan
allhavedifferentsetsofdata.Theproleontheconsolealso
correspondstotheapp.Youwillbepromptedtoselectaprole
in the app when you set up your account and connect to the
ellipticalforthersttime.
IfyouhaveselectedtheUser1prole,thensomeoneelsecan
become User 2 (and vice versa). From that point forward, the app
will check to make sure the console is toggled to the correct user
proleandwillautomaticallysendacommandtotheellipticalto
updatetheconsoleproleasneeded.
You will always have the option to proceed as Guest. Anyone can
connect to the elliptical as Guest. Any user connected as Guest
will have the data from the elliptical synced to their app.
NOTE – If you have opted to set your app as User 1 or User 2 but decide to
exercise without the app actively connected, then make sure that the console