User Manual

METER / OPERATION

BATTERY

INSTRUCTIONS

INSTALLING AND REPLACING

FitDesk

METER BATTERIES:

The meter (M) operates using

two AAA battery.

Batteries are incuded

Refer to the illustration to install

or replace the batteries.

For Questions Contact:

1-336- 423-5029

MONDAY - FRIDAY 9 A.M. - 5 P.M. EST

FitDesk

CAL

ODO

DIST

SPEED

TIME

SCAN

MODE

SET

RESET

INSTRUCTIONS:

1. Mode button advances the meter.

a. Time in use

b. Speed

c. Distance

d. Calories burned

e. Total miles on FitDesk

2. Reset button allows for monitor to be reset for time、

distance and calories mode.

a. Stop pedaling then push reset to reset each Mode.

3. Scan will automatically start at each Mode.

a. To Stop Scan press mode button again.

b. Scan indicator is on screen when in Scan Mode.

TROUBLESHOOTING:

1. Monitor will turn on as soon as you start pedaling.

2. If monitor does NOT show zero even if you push the Mode Button.

a. Check to see that batteries are fresh and properly installed

3. If zeros display when you press the Mode Button, But not when pedaling.

a. Check connection to monitor and connection from frame to monitor.

b. Plug monitor directly into frame connection near resistance adjuster.