User Manual

Step 6: Assemble the Saddle (A) to the Saddle Tube (G).

using attached wrench (BB1) Figure 6

Note: Make sure the lock nuts are extra tight.

Note: The

FitDesk

is supplied with an optional

Saddle Height Extender (C) for increased leg extension if

needed. It is recommended for use if you are taller than

5 feet 9 inches, or 175cm.

Step 8: Install the Saddle Back Assembly (D)

to the Saddle Post (G) using attached wrench

(BB1). Be sure the bolts sit flush in the square

holes (See Detail). Figure 8

Step 7: To attach the Saddle (A) and Saddle Tube,

(G) loosen the Saddle Tube Adjuster Knob (HH).

Figure 7

FIGURE 6

FIGURE 8

FIGURE 9

DETAIL

Step 9: Install the Saddle Back Cushion

(E) to the Saddle Post (D) using attached

Allen Wrench (AA). Be sure the Allen

Bolts (DD) and Lock Washers (EE) sit

flush in the holes. Figure 9

Note: Adjust the Saddle Back

tilt position by adjusting the Nut

and Allen bolt shown here.

Note: You do not have to remove the knob to adjust

the height. Loosen the knob and pull, then retighten

when the desired height is reached.

FIGURE 7

ASSEMBLY