User Manual

If you experience problems with the Fitbit, you can reset the Fitbit, by placing the Fitbit on the Base
Station and then pressing the reset button that is located underneath the Base Station. Use a sharp
implement to press the reset button.
The Fitbit device and the Base Station are also wireless tranceivers, which transmit data back and forth.
Future software will allow users to record and save this data on their computer.
3. Software
Sample software is provided which can transfer your data.
To use the software for Windows
• Unzip the contents of FitbitUSBXpressDriverInstall.zip and run the program
FitbitUSBInstaller.exe
• Plug in your Fitbit Base Station. If you have already plugged in the Base Station, please unplug
and re-plug the Base Station
• Unzip the contents of FitbitDebugger.zip and run the program fitbit-debugger-1.5.17.exe. You
should see the following screen show up.