User manual

Charging

Charging and operation assume installation and wiring as described in the Installation Guide, available

at http://www.shman.com/support/

We recommend fully charging the battery pack before using it for the rst time. Connect the charge

cable to the battery pack and plug into a wall socket using the included adapter. The small LED on the

battery pack will change from red to green when the charge is complete. Allow 3 hours for the battery

to be fully charged.

The battery charge LED indicates the following battery conditions:

Normal operation

No Light Normal. May also indicate a completely discharged battery.

Blinking Red Low battery. Connect your charger.

USB Charger Connected

Steady Red Charging.

Steady Green Fully charged.