Installation instructions

Active Pickup
Adding a Second Pickup to the Active Resophonic Pickup (Fishman
Blender System)
Adding a Microphone to the Active Resophonic Pickup (Fishman Blender
System)
Volume and Tone
ACTIVE PREAMP SPECIFICATIONS
Power 9V Alkaline battery
Battery Life 12,000 hours
Maximum Output Voltage 4 V peak to peak
Input Overload -.7dBV
Input Impedance 2.5 Meg Ohm
Output Impedance Less than 5 k Ohm
System Gain 3dB
Signal-to-noise Ratio 94 dB
Discrete Component Design FET low noise class A input stage, bipolar
class AB output stage
F ISHMAN R ESOPHONIC G UITAR P ICKUP
I NSTALLATION I NSTRUCTIONS - C ONTINUED
F
ISHMAN T RANSDUCERS
340-D Fordham Road Wilmington MA 01887 USA
Phone [phone] • Fax [phone] www.fishman.com
009-021-001 • Rev 2 • 3-10-02
®
REV.2.3
PJ FISHMAN
+
G
IN
R
-
Pickup Signal
to Tip ("IN")
2nd Pickup Signal
to Ring ("R")
Pickup Shield
to Ground ("G")
2nd Pickup Shield
to Ground ("G")
REV.2.3
PJ FISHMAN
+
G
IN
R
-
Pickup Signal
to Tip ("IN")
Microphone Signal
to Ring ("R")
Pickup Shield
to Ground ("G")
Microphone Shield
to Ground ("G")
Zener
Diode