User Guide ADT-100-S Shell Mount Drum Trigger ®
ADT-100-S Shell Mount Drum Trigger Thank you for your purchase of a FISHMAN product. Please read these instructions carefully. If you have any questions or problems, contact our Customer Service Department at 978-988-9665. PARTS LIST • FISHMAN ADT-100-S DRUM TRIGGER • DOUBLE-SIDED ADHESIVE • 1/4” JACK HOLDER CAUTION The ADT-100S is a sophisticated state state-of-the-art sensing device from which you can expect years of service. Note, however, that it is neither a microphone nor an amplifying source.
User Guide 1. Thoroughly clean the surface area onto which you have chosen to mount the trigger. The shell must be dry and free of dust or other contaminants. 2. Remove the release paper from one of the three adhesive squares provided and affix to the prepared surface of the shell. Make sure the adhesive square is set firmly in place. 3. Clean the bottom of the trigger.
Limited Warranty The FISHMAN ADT-100-S Shell Mount Drum Trigger is warranted to function for a period of One (1) Year from the date of purchase. If the unit fails to function properly within the warranty period, free repair and the option of replacement or refund in the event that FISHMAN is unable to make repair are FISHMAN’s only obligations. This warranty does not cover any consequential damages or damage to the unit due to misuse, accident, or neglect.
