Product Manual

4
RECEIVER
1. Carrying Strap: Keeps one hand free for marking
ground or pavement while using Tracer Probe.
2. Meter: Indicates signal strength up to a point
from metallic conductors while locating or tracing.
Meter also gives a visual indication of battery
strength.
3. Accessory Input: Use this jack to plug in all
accessories except the headphones.
4. Sensitivity:
A. Toggle switch to select NORMAL or HIGH
range.
B. Knob to control sensitivity level within the
NORMAL or HIGH range.
5. Depth Level: This bubble indicates the angle of
the receiver to the ground. Use it to keep Receiver
and Transmitter level during Inductive Locating
and for making the 45-degree angle necessary in
depth determination.
6. Headphones: Use this jack to plug in
headphones only. It automatically silences
speaker. Use in particularly noisy areas.
7. Battery Test: Turn unit ON then press this red
button and observe battery strength on meter. If
meter reads below 80, replace receiver batteries.
Usually transmitter & receiver batteries are
9
1
2
3
4
7
8
6
5