Product Manual

23
SPECIFICATIONS
Operating Frequency .........81.92 kHz +.005% ..... 81.92 kHz +.005%
Batteries ................................8 each, AA (NEDA 15) 8 each, AA
(NEDA 15)
Weight ..................................2 1/2 lbs. (1.1 kg) ......... 3 lbs. (1.36 kg)
Sensitivity ..............................N/A Normal: 400 uV typical High: 8 uV
typical
Signal-to-noise ratio ............N/A ............................................. 110dB
Headset Impedance ..........N/A ......................... 600 ohms (mono)
N/A .............................. 8 ohms (stereo)
Dimensions ...........................11 1/2” x 9” x 3 ...........11 1/2” x 9” x 3”
(29 x 23 x,.7.6 cm) ................(29 x 23 x 7.6 cm)
Operating Temperature .....-1O
0
F to +120
0
F, (-23
0
C to +48
0
C)
depending on batteries used.
Total Weight .........................5 1/2 lbs. (2.5 kg)
-(without handle or accessories, ground plate assembly or operating manual).
Total Shipping Weight ...............................................6 3/4 lbs. (3 kg)
-(including only ground plateassembly and operating manual.)
Total Shipping Volume ....................................69 cu. ft. (119.5 liters)
Transmitter Receiver
CONTENTS
Introduction ...............................................................................pg. 3
Receiver
.....................................................................................pg. 4
Transmitter
..................................................................................pg. 5
Component Descriptions
.........................................................pg. 6
Modes of Operation
.................................................................pg. 7
The Inductive Mode
..................................................................pg. 7
How to Assemble
......................................................................pg. 7
How to Tune
...............................................................................pg. 8
Inductive Locating (with handle)
............................................pg. 10
High Power (with handle)
.........................................................pg. 11
Inductive Tracing (without handle)
........................................pg. 12
Inductive Locating When Only Approximate Position of a
Linear Conductor is Known
......................................................pg. 13
Pinpointing Centering of the Pipeline
.....................................pg. 13
Determining Conductor Depth by Triangulation
..................pg. 14
Locating Manhole Covers, Valves, Tees and Risers
..............pg. 15
Locating Pipe When Other Lines are Close by
......................pg. 15
Conductive Tracing (without handle)
....................................pg. 16
Tracing Procedure
....................................................................pg. 18
The Tracer Probe
.......................................................................pg. 18
The Coupling Clamp
................................................................pg. 19
Locating Non-Metallic Pipes
....................................................pg. 20
Operating Hints
.........................................................................pg. 21
Changing Batteries
...................................................................pg. 22
Specifications
............................................................................pg. 23