User manual

OPERATING MODES

There are four discrimination modes: JEWELRY, COIN, ARTIFACT and

CUSTOM, and ALL METAL (A/M) mode. JEWELRY and COIN modes have

preset notch settings.

You can change all 9

target category notch

settings in all four

discrimination modes

and these changes will

be saved on shutdown.

Pressing the MODE

button will cycle through

the modes. The active

Mode will have bold

text. Use NOTCH to

change discrimination

settings in each mode.

The NOTCH function

does not work in All

Metal mode.

JEWELRY Mode preset NOTCH: Fe (Iron) category notched out.

COIN Mode preset NOTCH: Fe (Iron) and Target Category groups 2 (Foil) and 4

(Aluminum) notched out.

ARTIFACT Mode: All Target Categories enabled.

CUSTOM Mode: User definable.

FACTORY RESET

To reset your F44 to the default factory settings:

1. Turn the detector off.

2. Hold the MENU button down while pressing the Power button.

NOTE: This reset will erase any custom tone settings you may have entered

in the Custom Mode.

PINPOINT

Press and hold to activate. Searchcoil motion is not required; a motionless

searchcoil over a metal target will induce sound.

Audio is V.C.O. The 2-digit number displayed indicates target depth, in inches.

The scale is calibrated to coin-sized objects.

(Continued)