Installation Guide
Table Of Contents
- Safety and warnings
- Components
- Tools
- Appliance and cavity dimensions
- Cabinetry options
- Stainless steel door panel and toe kick dimensions
- Custom door panel and toe kick dimensions
- Custom door panel installation dimensions
- Custom door panel installation template
- Door clearance
- Electrical and plumbing
- Before installation
- Cavity preparation
- Water and power supply connection
- Top trim installation
- Side brackets installation
- Positioning into cabinetry
- Aligning inside cabinetry
- Door panel installation - stainless steel
- Door panel installation - custom
- Fixing to cabinetry
- Water filter installation
- Toe kick installation
- Door and door trims installation
- Cabinet trims installation — [A] Flexible spring clip method
- Cabinet trims installation — [B] Fixed screw method
- Final checklist
13
A
C
B
Floor
Left side
of cavity
Electrical and water connections must be within
this space if located behind the appliance
IMPORTANT!
●
Electrical connection should be located in an adjacent cabinet to either side
oftheappliance or above the appliance cavity.
●
We recommend to use an isolating switch that is easily accessible to the user
aftertheappliance is installed.
WARNING!
●
Electrical shock hazard. Assume all parts are live.
●
Disconnect supply before servicing and installation.
ELECTRICAL AND PLUMBING
ELECTRICAL AND PLUMBING CONNECTIONS
1
Recommended location for connections in adjacent area or unit
2
Alternative location for connections above the cavity
3
Alternative location for connections at rear of cavity
1
3
2
1
ELECTRICAL AND PLUMBING DIMENSIONS inches mm
A
Overall height of supply area 5 5/8 143
B
Overall width of supply area 29 3/4 756
C
Distance from right side of cavity 2 7/8 73
D
Distance from the floor 2 51
Note: Dimensions are based on minimum depth of cavity.
C
A
D
B