Installation Guide - Integrated Refrigerator Freezer

9
IMPORTANT!
Follow these steps for fitting the cavity bracket on the non-hinge side of both left and
right hinge appliances.
Attaching cavity bracket to appliance
1 Screw the cavity bracket with two M5x8 countersunk Phillips screws (A) to the location
where the hinge bracket was removed.
●
Ensure that the top face of the front trim is parallel to the appliance.
2 Shift the M5x10 pan head Phillips screws into the slots in the cavity bracket. (B).
●
If the front trim is not parallel to the appliance, screw M5x12 socket head cap screw (C) to
adjust the trim position.
3 Once the top trim is parallel to the appliance, secure the cavity bracket with another M5x8
countersunk screw (D).
C
D
A
B
8 ATTACH CAVITY BRACKET