Installation Guide
Table Of Contents
- Safety and warnings
- Components
- Tools
- Appliance and cavity dimensions
- Cabinetry options
- Stainless steel door panel and toe kick dimensions
- Custom door panel and toe kick dimensions
- Custom door panel installation dimensions
- Custom door panel installation template
- Door clearance
- Electrical and plumbing
- Before installation
- Cavity preparation
- Water and power supply connection
- Top trim installation
- Side brackets installation
- Positioning into cabinetry
- Aligning inside cabinetry
- Door panel installation - stainless steel
- Door panel installation - custom
- Fixing to cabinetry
- Water filter installation
- Toe kick installation
- Door and door trims installation
- Cabinet trims installation — [A] Flexible spring clip method
- Cabinet trims installation — [B] Fixed screw method
- Final checklist
39
G
F
CABINET TRIMS INSTALLATION—[A] FLEXIBLE SPRING CLIP METHOD
5
Insert the spring clip into the gap between the side trim and side trim bracket,
orientation as shown in figures (D) and (E).
IMPORTANT!
Ensure spring clip is correctly oriented with the open loop facing the side
trimlip.
Repeat for all side trims.
6
Open the French doors. Place the assembled side trim with brackets and spring
clips against the alcove side wall with the shorter lip facing the bottom (F).
IMPORTANT!
Ensure the side trim is positioned as high as it will go.
Push the side trim at each bracket location until there are no visible gaps
between the trim and cabinetry (G).
Repeat for all side trims.
Spring clip
Side trim lip
D
Top view of spring clip correctly inserted
between side trim and side trim bracket
E
short lip