Installation Guide

37
Attach the door side trims
3
Install the side trims by inserting into the panel gaps on each side of the
door(s) (C). Align the trim to the top of the door and press evenly into the
panel gap until fully seated (D).
Attach the covers
1
If applicable, remove any remaining protective
film on your door panels.
2
Open both doors. Attach the top covers (A)
firmly over the top studs, and the side covers
(B) to the side brackets.
A
B
F
Attach the drawer top and side trims
4
Peel off two dual adhesive tabs and press them
together to form a pair (E). Remove the adhesive
backing on one side only.
5
Press firmly to the underside of the drawer top trim
inthe indicated locations (F).
4
Remove the remaining adhesive backing from thedual adhesive tabs.
5
Locate the trim against the back surface of the panel and press down
firmly. Ensure the trim is fully seated against the drawer surface (G).
6
Install the side trims by inserting into the panel gaps on each side of the
door(s) (H).
– Make sure the cabinet is centered to prevent the side trims from
interfering with the cabinet.
G
H
Internal box
C
Door/drawer
trim install kit
Dual adhesive tabs
(10)
Side cover
(4)
Top cover
(2)
External box
Door side trim
(2)
Drawer side trim
(2)
Drawer top trim
(1)
DOOR AND DOOR TRIMS INSTALLATION
D
C
E