Installation

27
@2 ATTACH COVERS AND DOOR/DRAWER TRIMS
1
If applicable, remove any remaining protective
film on your door panels.
2
Open the refrigerator French doors, firmly push
top cover (A) over the top studs.
Open the refrigerator French doors, firmly push
side cover (B) over the side studs.
3
Door side trims
Install the side trims by inserting into the panel gaps on each
side of the door(s) (C). Align the trim to the top of the door
and press evenly into the panel gap until fully seated (D).
C
D
4
Press the dual adhesive tabs together to
form pairs (E) and remove the adhesive
backing on one side only.
Press firmly to install on the underside
of the drawer top trim in the indicated
locations (F).
F
E
5
Drawer side trims
Install the side trims in the same manner (refer to step
3
).
6
Drawer top trim
Remove the remaining adhesive backing from the dual adhesive tabs.
Locate the trim against the back surface of the panel and press down
firmly. Ensure the trim is fully seated against the drawer surface.
A
B