Installation
18
IMPORTANT!
The water connection instructions below are intended only for the professional installer.
The standard refrigerator includes a braided water line hose compatible with a brass adaptor.
Ensure the refrigerator is NOT plugged into a power supply.
Ensure there is enough tubing for the water connection and to pull the refrigerator out for service, if required.
!4 CONNECT TO WATER AND ELECTRICAL SUPPLY
1
Flush water through the hose prior to connection to the refrigerator
to remove any debris in the hose.
2
Move the refrigerator in front of the cabinetry close enough to allow
access behind for power and water connections.
3
At the front of the refrigerator,
connect an adaptor to one end of
the braided water line hose.
Note: The adaptor is not required
for installation, if 1/4”PEX plastic
tubing is used.
4
Insert the tube end of the adaptor fully
into the PRV. Once inserted, pull gently
on tubing to ensure it is locked in (A).
Note: Dislodge the PRV from the clips,
if required.
5
Secure the connection by attaching
the locking key in between the PRV
and tube end of theadaptor (B).
Note: If the PRV is dislodged for
installation (
3
), mount the PRV back
into the clip.
B
A
PRV